16

Set Up

Last Update 8 месяцев назад

When the device is first powered on, why is the indicator flashing red and green? Wi-Fi Setup Requirements Settings of Probes with RS485 Interface Reconnect to WiFi after changing a new WiFi SSID or password Failed to detect SIM card with WS1 Pro device (WiFi and SIM version)

CO2 Probe Operation Instructions

Tim

Last Update 9 месяцев назад

Before you begin utilizing the CO2 probe, it's essential to configure it on the console available at https://console.ubibot.com.

  1. Navigate to the device you intend to use with the CO2 probe and access the settings page on the console.
  2. Select “Sensor Display Setting”.

3. Choose a sensor field (field7 - 10) to edit. Note that fields 1 - 6 are designated for built-in sensors, while fields 7 - 10 are for external sensors.

4. From the dropdown menu, select "Carbon Dioxide-C1" and click "Save".

5. Proceed to the "Data Management" page, where you can configure the data measurement frequency for the external Carbon Dioxide probe.

Was this article helpful?

0 out of 0 liked this article